Products

Programmable, software-controlled, industrial USB 3.0 hub with 8 fast-charging (4A) ports, 2 host connections, and a dedicated port for control and monitoring. Control USB Hi-Speed, SuperSpeed data and power lines. Set current limit trip points for each port and monitor voltage and current on each port. Boost USB2 signal levels to account for difficult interconnection environments. Rugged steel housing and ESD protected to +/-15kV (IEC61000-4-2 Level 4).

Programmable software controlled USB hub with 2 host connections and 4 fast-charging (2.5A) device connections. Switch and control data, power and current limits separately. Boost USB signal levels to account for difficult interconnection environments. Rugged steel housing and ESD protected to 30kV.

Get everything you need to evaluate MTM and develop your next functional test system with Acroname's MTM Evaluation Kit. The MTM Evaluation Kit includes: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one MTM IO Serial Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.

Get up and running right out of the box with MTM on your functional test project. The MTM Starter Kit includes everything you need to start: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.

The MTM system is designed to reduce the wiring complexity of manufacturing test systems. S73-MTM-DEV is a breakout board designed for development and test of embedded and high-level programs with common MTM modules.  This kit includes all necessary cables to get started right out of the box.  

The LightWare SF11/C is a long range (0-120m), light weight laser altimeter designed for above-ground-level measurement from UAVs (multi-copter or fixed wing).  It is directly compatible with Pixhawk flight controllers.  

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

The MTM Power Module provides low voltage, highly stable, regulated DC power from 1.8VDC to 5.0VDC, with software controllable voltage and current limiting optimized for battery-powered device testing.

TeraRanger Tower 8 is a simultaneous, multi-axis scanner, capable of replacing traditional laser lidar scanners in some applications. Totally silent, zero moving parts, greater efficiency and reliability, the Tower is capable of Simultaneous Localization and Mapping (SLAM) and collision avoidance on fast-moving ground and airborne robots. Calibrated distance data is streamed from a USB or UART port as an array of synchronized distances, in millimeters.

The LightWare SF30/B is a high speed, light weight laser rangefinder for mapping and obstacle detection by robotic vehicles such as UAVs with a range up to 50m. 

The UST-10LX is a scanning laser range finder with a .02 to 10 meter range.  The sensor's interface is Ethernet.  Scanning rate is 25 milliseconds across a 270° range.  A 12/24VDC power source is required. 

TeraRanger One is a lightweight, high-performance distance measurement sensor based on infrared time-of-flight (ToF) technology. Type A is best for use in indoor environments.